Skip to Content

DeVilbiss Healthcare BPAP


Brand: DeVilbiss Healthcare

Model: RPM BiLevel CPAP

Model Number: 9055SE

Warranty: 2 years




The spontaneously triggered DeVilbiss RPM Bilevel CPAP permits independent pressure profile control of inspiratory and expiratory breathing cycles and a high level of Respiratory Performance Monitoring choices to increase patient comfort and enhance clinical value.


Product Highlights

IPAP/EPAP pressure range from 3-25 cmH2O in increments of .5 cmH2O.

Gives both spontaneous bilevel and conventional CPAP modes of operation.

On-board set-up. No remote needed.

For patient comfort, IPAP/EPAP rounding.

Delay time of 0 - 45 minutes in 5 minute increments (3 - 25 cmH2O range/.5 cmH2O increments). A fixed linear ramp occurs during the last 10 minutes of the chosen delay, IPAP rises until delta is reached and then both IPAP and EPAP rise to final settings.

Analog outputs using optional Analog Breakout Box (ABOB).

Auto On/Off - detects breathing and starts blower, detects mask off and turns blower off.

Mask off alert with keypad silence (any keypad button).

On-board compliance storage (36 Month) including Epworth, ON/OFF data and Performance Data. This is downloadable using LT software or eCompliance.


Technical Details

Colour: Gray

Sound Level: <30dB

Weight: 1.7 Kg

Width: 19.6 cm

Length: 26.2cm

Height:10.2 cm

Pressure Range: IPAP/EPAP 3-25 cmH2O

Pressure Delay Function: 0-45 min, 5 min increments

Delay Pressure: Adjustable

Pressure Compensation: For mask leaks, temperature & altitude variations.

Device Setup: On-Board Setup

Operating Temperature Range: Between +5oC , +34oC

Operating Voltage Range: 100-240 VAC 50/60 Hz

Power Consumption: 65W

urunler | DSA